Technical Support for Better Results
Documents, application guidance and coating systems to help specifiers and applicators get the finish right the first time.
TDS Library
Technical data sheets for every product: product type, application, finish, coverage and storage. Where a figure is not yet fixed, it is marked To be confirmed.
Request TDS →SDS Library
Safety data sheets covering handling, storage and transport for all LIMEKA products.
Request SDS →Application Guide
Surface preparation, priming, mixing and application steps for each coating system.
Read guide →Coating System
Layer-by-layer build-up diagrams for mineral-effect, decorative, paint, elastic and floor systems.
View systems →Technical guides
Coatings, systems and specification
Practical guides for architects, contractors, distributors and brand owners.

Stone-Effect Coatings vs Stone Cladding
Stone-effect coatings and stone cladding are different construction systems. Cladding uses solid stone panels fixed to a facade; LIMEKA coatings creat…
Read guide →
Water-in-Sand vs Water-in-Water vs Real Stone Paint
These three products all create a stone-effect facade, but they use different coating structures and produce different surfaces. Water-in-sand gives a…
Read guide →
Exterior Wall Coating System: Primer, Base, Finish and Topcoat
A durable exterior wall finish is a system, not a single bucket of paint. Performance depends on substrate preparation, primer, base coat, decorative…
Read guide →
Elastic Wall Coatings for Crack Repair and Weather Protection
Elastic wall coatings are flexible textured finishes designed to accommodate small movements in exterior walls. They can cover hairline cracks, improv…
Read guide →
Epoxy Floor Coating System: Primer, Mortar, Putty and Topcoat
An epoxy floor is a multi-layer system. The primer seals the concrete, the mortar provides strength and level, the putty closes pores, and the topcoat…
Read guide →
OEM and Private-Label Architectural Coatings: What to Prepare
OEM and private-label projects work best when the product, packaging and label are defined before production. LIMEKA can support custom labels, produc…
Read guide →Application
Five steps to a durable finish
- 01Substrate checkConcrete or masonry must be sound, dry, clean and level. Moisture below 10%, pH below 10.
- 02LevellingApply cement mortar or skim coat and allow to cure. Sand to a flat surface.
- 03PrimingApply alkali-resistant primer and let it dry. Do not skip this layer.
- 04Main coatApply the decorative or mineral-effect coating in one or two passes, following the product guide.
- 05TopcoatApply the protective topcoat for water, stain and colour retention.

Frequently Asked Questions
Yes. Send a physical sample or a reference and our colour lab will prepare a matching board for approval.
Water-in-sand uses mineral granules for a 3D mineral-effect coating; water-in-water uses suspended colour particles for a flat marble effect.
Yes. We support custom packaging, labels and product naming for qualified distributors.
It depends on product and quantity. Contact us with your specification and destination port for a schedule.