Technical guides

Elastic Wall Coatings for Crack Repair and Weather Protection

Elastic wall coatings are flexible textured finishes designed to accommodate small movements in exterior walls. They can cover hairline cracks, improve weather resistance and provide a decorative surface, but they are not a structural repair for active or wide cracks.

How elastic coatings work

The cured film remains flexible and can stretch with minor substrate movement. A reinforcing mesh or crack treatment may be needed at known crack lines. The elastic coat is then protected with a weather-resistant topcoat.

Preparation and limits

Cracks must be diagnosed first. Repair structural cracks, active leaks and unstable substrates before coating. Use a suitable primer and follow the specified film thickness; too thin a coat will not perform as intended.

  • Diagnose crack cause and movement
  • Repair active leaks and loose substrate
  • Use reinforcing treatment where required
  • Apply the specified thickness and topcoat

Specification

Confirm substrate, crack treatment, primer, elastic base coat, texture and topcoat as one system. Approve colour and texture on a physical sample and check compatibility with existing coatings.

Questions and answers

Can elastic coating fix structural cracks?

No. Structural cracks and active leaks must be repaired first; the coating is a protective and decorative finish.

Can it be applied over old paint?

Only after checking adhesion and compatibility. Loose or chalky coatings must be removed.

Does it stop all water penetration?

It improves weather resistance when correctly specified, but joints, seals and flashings also need to be watertight.

Elastic Wall Coatings for Crack Repair | LIMEKA | LIMEKA